TM 9-2320-387-24-2
1 O-58.
Ml 3 DECONTAMINATION
BRACKETS INSTALLATION
This task covers:
Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance
Level
Unit
Manual References
TM 9-2320-387-24P
NOTE
The following procedure is for initial installation of apparatus
(PM E5-51-527). This apparatus is not included in TM 9-2320-387-24P.
Perform steps 1 through 4 for Ml113 vehicle only Perform steps 5
through 7 for Ml114 vehicle only.
1
Installation
1
1.
Using plate (3) as template, locate, mark, and drill twenty-four 0.187-in. diameter holes (1) in rear
of shelter (2).
2.
Install plate (3) on shelter (2) with twenty-five rivets (4).
3.
Install four rivnuts (7) in holes (8) of plate (3).
4.
Install bracket (6) on plate (3) with four capscrews (5). Tighten capscrews (5) to 49 lb-ft. (66 N-m).
5.
Using bracket (9) as a template, locate, mark, and drill four 0.333 diameter holes (13) in cargo
floor (14).
6.
Install four rivnuts (12) in holes (13).
7.
Install bracket (9) on cargo floor (14) with four lockwashers (11) and screws (10).
,.
1 O-98
