10-52. CARGO TIEDOWN REPLACEMENT
This task covers:
a. Removal
b. Installation
NOTE
For removal of rear cargo tiedown, one assistant will be needed.
1.
Remove hex-head screw (1) and front cargo tiedown (2) from cargo floor (3).
2.
Remove locknut (7), washer (6), hex-head screw (4), and rear cargo tiedown (5) from cargo floor (3).
Discard locknut (7).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment:
automotive (Appendix B, Item 2)
Materials/Parts
Locknut (Appendix G, Item 121)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-24P
Maintenance Level
Unit
NOTE
For installation of rear cargo tiedown, one assistant will be needed.
1.
Install front cargo tiedown (2) on cargo floor (3) with hex-head screw (1). Tighten hex-head screw
(1) to 65 lb-ft (88 N•m).
2.
Install rear cargo tiedown (5) on cargo floor (3) with hex-head screw (4), washer (6), and locknut (7).
Tighten locknut (7) to 65 lb-ft (88 N•m).
TM 9-2320-387-24-2
Change 1
10-87
a. Removal
b. Installation
1
2
3
3
4
5
6
7
