TM 9-2320-387-24-2
27-3.
BODY WIRING HARNESS REPLACEMENT (Cont’d)
40.
41.
42.
Remove three capscrews (I), two nuts (41, washers (51, screws (121,
washers (111, screws (91,
lockwashers (81, and washers (7) from bracket (10) and coverplate (2). Remove coverplate (2) from
battery box (6) and B-beam (3). Discard lockwashers (8).
Remove two capscrews (17) from coverplate (13) and B-beam (3).
Remove two capscrews (161, lockwashers (151, washers (141, and coverplate (13) from battery
box (6). Discard lockwashers (15).
43.
Remove two harness leads (18) from circuit breaker (19).
NOTE
Perform step 40 for Ml113 models only. Perform steps 41 and 42
for Ml114 models only.
27-10
