TM 9-2320-387-24-l
6-21. STABILIZER BAR LINK REPLACEMENT
1
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-387-24P
hlaterials/Parts
Maintenance
Level
Unit
Locknut (Appendix G, Item 117)
Sealing compound (Appendix C, Item 63)
I a. Removal 1
1.
Remove locknut (1) and two washers (2) from bar link (3) and stabilizer bar (4). Discard locknut (1).
2.
Remove capscrew (51, two washers (61, and bar link (3) from lower control arm (7).
b. Installation
1.
Apply sealing compound to threads of capscrew (5). InstaIl bar Iink (3) on lower control arm (7) with
two washers (6) and capscrew (5). Tighten capscrew (5) to 70 lb-R (95 Nom).
2.
Install bar link (3) on stabilizer bar (4) with two washers (2) and locknut (1). Tighten locknut (1) to
75 Ib-ft (102 Nom).
6-50
