TM 9-2320-387-24-l
6-20. STABILIZER BAR REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL
SETUP:
TO&
General mechanics tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
%o locknuts (Appendix G, Item 117)
hfanual References
Thl9-2320-387-24P
Maintenance Level
Unit
1 a. Removal 1
1.
Remove two locknuts Cl), nuts (51, and six washers (2) from two bar links (3) and stabilizer bar (11).
Discard locknuts (1). Remove two bar links (3) and pins (4) from stabilizer bar (11).
2.
Remove four nuts (91, washers (lo), two clamps (81, and stabilizer bar (11) from two frame brackets (6).
3.
Remove two stabilizer bar bushings (7) from stabilizer bar (11).
1 b. Installation 1
1.
Install two stabilizer bar bushings (7) on stabilizer bar (11).
2.
Install stabilizer bar (11) on two frame brackets (6) with two clamps (81, four washers (lo), and nuts (9).
Tighten nuts (9) to 60 lb-R (81 N-m).
3.
Install two pins (4) in bar links (3).
4.
Install stabilizer bar (11) on two bar links (3) with six washers (21, two nuts (51, and locknuts (1).
Tighten locknuts (1) to 75 lb-ft (102 N-m).
6-49
