TM 9-2320-387-24-l
_
4-30. FUEL PRESSURE TRANSDUCER REPLACEMENT
I
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
TOOIS
?&era1
mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materialflarts
Sealing compound (Appendix C, Item 61)
Manual References
TM 9-2320-387-10
Thl9-2320-387-24P
Equipment Condition
l Battery ground cables disconnected (para. 468).
l Hood raised and secured (TM 9-2320-387-10).
Maintenance Level
unit
NOTE
The fuel pressure transducer is a sensor unit for diagnostic
testing. It is mounted on top of the fuel filter on firewall of vehicle.
71
1.
Disconnect multiple connector (2) from STE/ICE-R wiring harness (3).
2.
Remove fuel pressure transducer (1) from fuel filter (4).
[b.j
1. Apply sealing compound to threads of fuel pressure transducer (1).
2.
Install fuel pressure transducer (1) on fuel filter (4).
3.
Connect multiple connector (2) to STE/ICE-R wiring harness (3).
FOLLOW-ON TASKS: l Connect battery ground cables (para. 4-68).
. Start engine (TM 9-2320-387-10) and check fuel pressure transducer for leaks.
. Lower and secure hood (TM 9-2320-387-10).
ii
4-54
