TM 9-2320-387-24-l
4-29. OIL PRESSURE SENDING UNIT MAINTENANCE
Tbis task covers:
a Removal
b. Inspection
c. hstallation
INITIAL SETUP:
ToOis
General
mechanic’s tool kit:
automotive (Appendix B, Item 1)
Maintenance and repair shop equipment
automotive (Appendix B, Item 2)
Materials/Parts
Sealing compound (Appendix C, Item 61)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
l Battery ground cables disconnected (para. 4-68).
l Engine access cover removed (para. 10-22).
Maintenance Level
unit
a. Removal
1.
Disconnect lead 36A (5) from oil pressure sending unit (4).
2.
Remove clamp (1) and oil pressure sending unit (4) from bracket (2).
3.
Disconnect oil pressure sending unit (4) from connector (3).
b. Inspection
Inspect connector (3) for damage. Replace if damaged.
c Installation
1.
Apply sealing compound to threads of oil pressure sending unit (4).
2.
Connect oil pressure sending unit (4) to connector (3).
3.
Install oil pressure sending unit (4) on bracket (2) with clamp (1). Tighten clamp to 10-20 l&n.
(l-2 N-m).
4.
Connect lead 36A (5) to oil pressure sending unit (4).
4-52
