TM 9-2320-387-24-
1
3-41. LEFT FUEL INJECTION LINES BRACKET REPLACEMENT
Thii task
covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
%&era1 mechanic’s tool kit:
automotive (Appendix B, Item 1)
blanual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
l Hood raised and secured (TM 9-2320-387-10).
l Engine access cover removed (para. 10-221.
hlaintenance Level
Unit
rY-iizq
1.
Remove screw-assembled washer (2) and clamp (1) from bracket (5).
2.
Remove screw-assembled washer (8) and clamp (9) from bracket (5).
3.
Remove two screw-assembled washers (31 and oil dipstick tube (4) from bracket (5).
4.
Remove two nuts (6), washers (7), and bracket (5) from valve cover studs (10).
b. Installation
1.
Install bracket (6) on two valve cover studs (10) with washers (7) and nuts (6). Tighten nuts (6) to
13-20 lb-ft (18-27 Nom).
2.
Secure oil dipstick tube (4) to bracket (5) with two screw-assembled washers (3). Tighten screw-
assembled washers (3) to 3-4 lb-ft (4-5 N-m).
3.
Install clamp (9) on bracket (5) with screw-assembled washer (8). Tighten screw-assembled
washer (8) to 3-4 lb-ft (4-5 N-m).
4.
Install clamp (1) on bracket (5) with screw-assembled washer (2). Tighten screw-assembled
washer (2) to 3-4 lb-ft (4-5 N-m).
FOLLOW-ON TASKS:
Install
Lower
engine access cover (para. 10-22).
and secure hood (TM 9-2320-387-10).
--
3-80
