TM 9-2320-387-24-l
1 3-40. RIGHT FUEL INJECTION LINES BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INlTlAl. SETUP:
Tools
General mechanic’s tool kiti
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-387-24P
Equipment Condition
l Engine access cover removed (para. 10-22).
l Air horn removed (para. 3-14).
Maintenance Level
Unit
[ a. Removal
1
1.
Remove two screw-assembled washers (6), clamps (51, and clamp (7) from bracket (1).
2.
Inspect two clamps (5) for cracks or breaks. Replace if defective.
3.
Remove two nuts (31, washers (21, and bracket (1) from valve cover studs (4).
I
b. Installation
I
1.
2.
Install bracket (1) on two valve cover studs (4) with washers (2) and nuts (3).
13-20 lb-R (18-27 N-m).
Install two clamps (5) and clamp (7) on bracket (1) with two screw-assembled
screw-assembled washers (6) to 3-4 lb-R (4-5 Nom).
-
Tighten nuts (3) to
washers (6). Tighten
FOLLOW-ON TASKS: l Install air horn (para. 3-14).
l Install engine access cover (para. 10-22).
3-79
