TM 9-2320-387-24-l
1 3-32. FUEL TANK HANGERS REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
hlaterials/Parts
Equipment Condition
Fuel tank removed (para. 3-25).
Maintenance Level
Unit
Adhesive (Appendix C, Item 2)
Manual References
TM 9-2320-387-24P
1.
Remove two nuts (3), washers (4), capscrews (51, and rear hangers (7) from supports (6).
2.
%vist two front hangers (9) until tee handles (2) clear slots (11) in support (1) and remove front hangers (9).
3.
Inspect four insulators (8) on front and rear hangers (9) and (7). Remove insulators (81, if damaged.
11
1.
Install four insulators (8) on front and rear hangers (9) and (71, if removed.
2.
Install two front hangers (9) by inserting tee handles (2) up through slots (11) in support (1). Twist
hangers (9) so that tee handles (2) are resting across slots (11) and against side of ridge (10).
NOTE
Apply adhesive to threads of screws before installation.
3.
Install two rear hangers (7) on supports (6) with capscrews (51, washers (41, and nuts (3).
Tighten nuts (3) to 37 lb-ft (50 N-m).
FOLLOW-ON TASK: Install fuel tank (para. 3-25).
3-63
