TM 9-2320-387-24-l
3-35. FUEL FILTER DRAIN HOSE AND VALVE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General
mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Locknut (Appendix G, Item 1091
Equipment Condition
Hood raised and secured (TM 9-2320-387-10X
General Safety Instructions
Do not perform this procedure near fire, flames, or
sparks.
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Personnel Required
One mechanic
One assistant
Maintenance
Level
Unit
WARNING
Diesel fuel is highly flammable. Do not perform this procedure near
fire, flames, or sparks. Severe injury or death may result.
Cover or plug all open hoses and connections immediately after
disconnection to prevent contamination. Remove all plugs prior to
connection.
NOTE
l For fuel filter drainvalve replacement, perform steps 1 and 2
only.
l Have drainage container ready to catch fuel.
1.
Loosen clamp (7) and disconnect drain hose (10) from fuel filter drainvalve (6).
2.
Remove nut (13) and fuel filter drainvalve (6) from bracket (14) (Ml113 only) or splash shield (12)
(Ml114 only).
3.
Loosen clamp (2) and disconnect fuel filter drain hose (10) from fuel filter assembly (1).
4.
Remove locknut (51, capscrew (111, clamp (41, and drain hose (10) from cowl panel (3). Discard
locknut (5).
5.
Remove capscrew (91, drain hose (lo), and clamp (8) from panel (3).
b. Installation
NOTE
For fuel filter drainvalve replacement, perform steps 4 and 5 only.
1.
Install drain hose (10) on cowl panel (3) with clamp (8) and capscrew (9).
2.
Install drain hose (10) on cowl panel (3) with clamp (4), capscrew (111, and locknut (5).
3.
Connect drain hose (10) to fuel filter assembly (1) and tighten clamp (2).
4.
Install fuel filter drainvalve (6) on bracket (14) (Ml113 only) or splash shield (12) (Ml114 only).
5.
Connect drain hose (10) to fuel filter drainvalve (6) and tighten clamp (7).
3-68
