TM 9-2320-387-24-l
3-31. FILLER SPOUT HOSE REPLACEMENT
I
.-.--
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
l Fuel tank drained (para. 3-251.
l Right rear underbody armor removed (Ml114 only)
(para, 11-39).
General Safety Instructions
Do not perform this procedure near fire, flames, or
sparks.
Maintenance Level
unit
WARNING
Diesel fuel is highly flammable. Do not perform this procedure
near fire, flames, or sparks. Severe injury or death may result.
1 a. Removal
1
1.
Loosen clamps (4) and (3) securing hose (1) to fuel tank (51 and filler spout (2).
2.
Slide hose (11 onto filler spout (21 until disconnected from fuel tank (5). Remove hose (1) from filler
spout (2).
b. Installation
NOTE
Position clamps attaching filler hose to fuel tank as shown.
1.
Install hose (1) on filler spout (2) and slide onto filler spout (2) until hose (11 clears fuel tank (5).
2.
Connect hose (1) to fuel tank (5) and tighten clamps (3) and (4).
FOLLOW-ON TASKS: l Install right rear underbody armor (Ml114 only) (para. 11-39).
. Fill fuel tank (TM 9-2320-387-10) and check for leaks.
3-62
