TM 9-2320-362-14&P
4-18. EES KIT INSTALLATION (Cont’d)
ee. Cable Assembly W66 Installation
1.
2.
3.
4.
5.
6.
Use figure
installing
Install loop clamp
NOTE
3-2, Engine Electrical Interface, when
cable assembly W66.
(5) on cable assembly W66 (11).
Apply conductive antiseize compound to terminal lug (13) on wire
no. 798 (9) and terminal lug (14) on wire no. 58 (12).
Install safety tab (6), loop clamp (5), wire no. 798 (9), and wire
no. 58 (12) to engine block (7) and secure with screw (10).
Route wires no. 798 (9) and no. 436 (2) along engine wiring
harness (8) and across engine to compressor.
Connect wire no. 798 (1) into wire no. 798 (4) (on compressor).
Connect wire no. 436 (2) into wire no. 436 (3) (on compressor).
4-72
