TM 9-2320-362-14&P
4-18. EES KIT INSTALLATION (Cont’d)
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
4-64
Remove four screws (6) and lockwashers (7) that secures cover (8)
and gasket (5)
Remove nut (9)
to regulator (4).
Remove cover (8) and gasket (5).
NOTE
Tag leads for installation.
and lockwasher (10) that secures wire no. 5A (11)
to stud (3) and disconnect wire no. 5A (11).
Remove rubber wedge (14) from opening in regulator (4).
Remove nut (12) and lockwasher (13) that secures old wire no.
568 (2) to stud (3) and disconnect old wire no. 568 (2).
Disconnect old wire no. 568 (2) from wire no. 568A (1) and remove
old wire no. 568 (2).
Connect new wire no. 568 (2) to wire no. 568A (1) and install into
rubber wedge (14).
Install new wire no. 568 (2) to stud (3) and secure with
lockwasher (13) and nut (12).
Install wire no. 5A (11) to stud (3) and secure with lock-
washer (10) and nut (9).
Install rubber wedge (14) in opening in regulator (4).
Install gasket (5) and cover (8) to regulator (4) and secure
with lockwashers (7) and four screws (6).
