TM 9-2320-362-14&P
3-31. POWER INTERFACE BOX REPAIR (Contd)
c. Strike and Clamping Catch Removal
1.
Unlatch clamping catch (1) from strike (5) and open cover (4).
2.
Remove two screws (2) and self-locking nuts (3) from clamping
catch (l).
Remove clamping catch (l). Discard self-locking
nuts (3).
3.
Remove two screws (7) and lockwashers (6) from strike (5).
Remove strike (5).
Discard lockwashers (6).
d. Strike and Clamping Catch Installation
Install strike (5) to cover (4) and
lockwashers (6).
Install clamping catch (1) to cover
and self-locking nuts (3).
Close cover (4) and fasten clamping
secure with two screws (7) and
(4) and secure with two screws (2)
catch (1) to strike (5).
3 - 7 2