i. Siren Battery Wires Installation
TM 9-2320-280-20-3
12-185. SIREN AND WARNING LIGHT INSTALLATION (Cont’d)
1. Install fabricated wire "K" (1) on top mounting screw (6) of relay (5) with washer (7) and nut (2).
2. Install fabricated wire “L” (3) on lead “C” (4) of relay (5).
3. Route wires “K” (1) and “L” (3) through grommet opening (8) in firewall (9).
4. Route wires (10) along cable harness (11) in engine compartment (12).
5. Raise steering column (14) and tighten nut (13).
12-292
