6. Install packing (8) and lens (7) on dash panel (5).
12-286
e. Siren and Warning Light Switch and Indication Installation
TM 9-2320-280-20-3
12-185. SIREN AND WARNING LIGHT INSTALLATION (Cont’d)
1. Loosen nut (1) and lower steering column (2).
2. Locate, mark, and drill six 0.187-in. (4.8-mm) diameter holes (3) in dash panel (5).
3. Locate, mark, and drill three 0.750-in. (19-mm) diameter holes (4) in dash panel (5).
4. Install warning light switch (11) on dash panel (5) with two lockwashers (10) and screws (9).
5. Install lamp (13) on indicator lamp assembly (12) and install indicator lamp assembly (12) on dash
panel (5) with two screws (6).
