TM 9-2320-280-20-3
12-282
Change 1
Section XI. ACCESSORY KITS INSTALLATION
12-184. ACCESSORY KITS INSTALLATION TASK SUMMARY
TASK
PAGE
PARA.
PROCEDURES
NO.
12-185.
Siren and Warning Light Installation
12-282
12-186.
Underbody Protection Kit Replacement
12-296
12-187.
Brushguard Assembly Replacement
12-310
12-188.
Floor Drain Hole Plate Installation
12-312
12-185. SIREN AND WARNING LIGHT INSTALLATION
This task covers:
a.
Manufactured Items
f.
Siren Electrical Wires Installation
b.
Warning Light Assembly Installation
g.
Passenger's Side Siren Switch and Driver's Side
c.
Siren Assembly Installation
Siren Switch Installation
d.
Circuit Breaker and Relay Installation
h.
Warning Light Assembly Electrical Wires
e.
Siren and Warning Light Switch and
Installation
Indicator Installation
i.
Siren Battery Wires Installation
INITIAL SETUP:
Applicable Models
M1025, M1025A1, M1025A2, M1026, M1026A1
Tools
General mechanics tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Adhesive (Appendix C, Item 1)
Adhesive-sealant (Appendix C, Item 10)
Siren mounting bracket (Appendix D, Fig. 68)
Warning light mounting bracket
(Appendix D, Fig. 69)
Wire D (Appendix D, Fig. 70)
Wire F (Appendix D, Fig. 71)
Wire G (Appendix D, Fig. 72)
Wire L (Appendix D, Fig. 73)
Wire K (Appendix D, Fig. 74)
Wire I (Appendix D, Fig. 75)
Wire N (Appendix D, Fig. 76)
Wire H (Appendix D, Fig. 77)
Wire J (Appendix D, Fig. 78)
Material/Parts (Cont'd)
Wire A (Appendix D, Fig. 79)
Wire B (Appendix D, Fig. 80)
Wire M (Appendix D, Fig. 81)
Relay Connector (Appendix D, Fig. 82)
Locknut (Appendix G, Item 102)
Two lockwashers (Appendix G, Item 139)
Eight lockwashers (Appendix G, Item 111)
Ten locknuts (Appendix G, Item 103)
Lockwasher (Appendix G, Item 115)
Six lockwashers (Appendix G, Item 125)
Lockwasher (Appendix G, Item 127)
Packing (Appendix G, Item 167)
Ten tiedown straps (Appendix G, Item 242)
Manual References
TM 9-2320-280-24P
Equipment Condition
Batteries removed (para. 4-79).
Engine access cover removed (para. 10-15).
a. Manufactured Items
NOTE
Prior to installing the siren and warning light, assemble
required materials listed in Materials/Parts.