1.
Remove four screws (2), lockwashers (3), washers (1), and cargo floor access cover (4) from cargo
floor (5). Discard lockwashers (3).
2.
Remove adhesive sealant from cargo floor access cover (4) and cargo floor (5).
Inspect for missing or damaged insert nuts (6). Replace missing or damaged insert nuts (6) (para. 10-66).
1.
Apply adhesive sealant to cargo floor (5) and cargo floor access cover (4).
2.
Install cargo floor access cover (4) on cargo floor (5) with four washers (1), lockwashers (3), and
screws (2).
c. Installation
b. Inspection
a. Removal
INITIAL SETUP:
TM 9-2320-280-20-3
10-56.2
Change 1
10-31.1. CARGO FLOOR ACCESS COVER MAINTENANCE (M1123)
This task covers:
a.
Removal
c.
Installation
b.
Inspection
Tools
General mechanics tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Four lockwashers (Appendix G, Item 114)
Adhesive sealant (Appendix C, Item 9.1)
Manual References
TM 9-2320-280-24P
Equipment Condition
Mortar ammo container removed, if equipped
(para. 12-149).
Rear radio rack removed, if equipped
(para. 12-144).
Troop/cargo winterization heater assembly
removed, if equipped (para. 12-95).
Troop/cargo winterization front cargo floor cover
removed, if equipped (para. 12-110).
S250 shelter removed, if equipped (para. 11-120).
Ammo box tray (40 mm and 50 cal.) removed, if
equipped (para. 11-105).
Soft top ambulance litter assembly removed, if
equipped (para. 11-124).
