TM 9-2320-280-20-3
10-33. DRIVERS SEAT AND SEAT BACK CUSHIONS REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Applicable Models
Materials/Parts
M966, M996, M997, M998, M1025, M1026,
Four hitch pins (Appendix G, Item 53)
M1035, M1036, M1037, M1038, M1042,
M1043, M1044, M1045, M1046, M1097
Manual References
TM 9-2320-280-24P
Tools
General mechanics tool kit:
automotive (Appendix B, Item 1)
1. Remove four hitch pins (2) from seat holddown pins (5). Discard hitch pins (2).
2. Remove four seat back cushion flaps (4) from holddown pins (5) and remove seat back cushion (3)
from seat frame (7).
3. Remove two seat cushion straps (6) from holddown pins (5).
4. Remove front retainer strip (8) from seat frame (7) and remove seat cushion (1).
I
b. Installation
I
1. Install seat cushion (1) on seat frame (7) and install retainer strip (8) on seat frame (7).
2. Install two seat cushion straps (6) on holddown pins (5).
3. Install seat back cushion (3) on seat frame (7) and four flaps (4) on holddown pins (5).
4. Install four hitch pins (2) on holddown pins (5).
1O-6O
