TM 9-2320-280-20-3
11-35. HOOD FRONT ARMORED GRILLE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
All models except M998, M998A1, M1035,
M1035A1, M1035A2, M1037, M1038, M1038A1,
M1042, M1097, M1097A1, M1097A2
TOOlS
General mechanic’s tool kit:
automotive ( Appendix B, Item 1)
Materials/Parts
Three locknuts (Appendix G, Item 66)
Three lockwashers (Appendix G, Item 109)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Hood raised and secured (TM 9-2320-280-10).
1. Remove three locknuts (5), washers (4), and carriage bolts (2) from front grille (3) and hood (1).
Discard locknuts (5).
2. Remove three capscrews (6), harness clamps (7), lockwashers (8), washers (9), and grille (3) from
hood (1). Discard lockwashers (8).
1. Install front grille (3) on hood (1) with three washers (9), lockwashers (8), harness clamps (7), and
capscrews (6).
2. Secure grille (3) to hood (1) with three carriage bolts (2), washers (4), and locknuts (5).
3. Tighten locknuts (5) to 21 lb-ft (29 N.m). Tighten capscrews (6) to 20-30 lb-in. (2-3 N.m).
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10).
11-54
