TM 9-2320-280-20-3
10-10. CENTER HOOD STOP GUIDE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-10
automotive (Appendix B, Item 1)
TM 9-2320-280-24P
Materials/Parts
Equipment Condition
Six locknuts (Appendix G, Item 58)
Rear end of cargo shell door raised
(TM 9-2320-280-10).
Remove six locknuts (5), washers (2), capscrews (1), washers (2), two guide plates (3), and guide brackets (4)
from hood (6). Discard locknuts (5).
Install two guide plates (3) and guide brackets (4) on hood (6) with six washers (2), capscrews (1),
washers (2), and locknuts (5). Tighten locknuts (5) to 10 lb-ft (14 N.m).
FOLLOW-ON TASK Lower and secure hood (TM 9-2320-280-10).
10-15
