10-9.1. JACK RETAINING STRAP REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Slide driver’s seat (1) forward.
2.
Remove four locknuts (7), washers (6), screws (4), two footman loops (2), and jack retaining strap (3)
from vehicle floor (5). Discard locknuts (7).
INITIAL SETUP:
Applicable Models
M1097A1, M1097A2, M1123
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Four locknuts (Appendix G, Item 91)
Manual References
TM 9-2320-280-24P
b. Installation
TM 9-2320-280-20-3
1.
Install jack retaining strap (3) and two footman loops (2) on vehicle floor (5) with four screws (4),
washers (6), and locknuts (7).
2.
Slide driver’s seat (1) backward.
Change 1
10-14.1/(10-14.2 blank)
