TM 9-2320-280-20-3
11-27. CARGO SHELL DOOR REAR STRIKER MOUNTING PLATE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Personnel Required
All models except M996, M996A1, M997,
One mechanic
M997A1, M997A2 M998, M998A1, M1035,
One assistant
M1035A1, M1035A2, M1037, M1038,
M1038A1, M1042, M1097, M1097A1,
Manual References
M1097A2
TM 9-2320-280-10
TM 8-2320-280-24P
Tools
General mechanic’s tool kit
Equipment Condition
automotive (Appendix B, Item 1)
l Rear striker removed (para. 11-26).
Materials/Parts
l Cargo shell door strap removed (left side only)
(para. 11-22).
Six locknuts (Appendix G, Item 79)
1. Remove locknut (5), washer (4), and socket head screw (2) from striker mounting plate (3) and
wheelhouse (8). Discard locknut (5).
2. Remove five locknuts (6), washers (7), capscrews (1), washers (9), and striker mounting plate (3)
from wheelhouse (8). Discard locknuts (6).
I
b. Installation
1. Install striker mounting plate (3) on wheelhouse (8) with five washers (9), capscrews (1), washers (7),
and locknut.s (6).
2.
Secure striker mounting plate (3) to wheelhouse (8) with socket head
locknut (5). Tighten locknuts (5) and (6) to 25-30 lb-ft (34-41 N.m).
screw (2), washer(4), and
FOLLOW-ON TASKS: l Install cargo shell door strap (left side only) (para. 11-22).
l Install rear striker (para. 11-26).
11-45
