TM 9-2320-280-20-3
10-80. MIRROR ARM ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-24P
automotive (Appendix B, Item 1)
Equipment Condition
Materials/Parts
Mirror removed (para. 10-79).
Two lockwashers (Appendix G, Item 109)
Nylon washer (Appendix G, Item 152)
1. Remove special nut(1), lockwasher (2), and washer (3) from pivot bracket (4) and mounting
bracket (5). Discard lockwasher (2).
2. Remove mirror arm (7), pivot bracket (4), and nylon washer (6) from mounting bracket (5). Discard
nylon washer (4).
3. Remove nut (10), lockwasher (11), capscrew (8), two spacers (9), and mirror arm (7) from pivot
bracket (4). Discard lockwasher (11).
1. Install two spacers (9) and mirror arm (7) on pivot bracket (4) with capscrew (8), lockwasher (11),
and nut (10). Tighten nut (10) to 15 lb-ft (20 N-m).
2. Install nylon washer (6), pivot bracket (4), and mirror arm (7) on mounting bracket (5) with
washer (3), lockwasher (2), and special nut (1).
FOLLOW-ON TASK: Install mirror (para. 10-79).
10-131
