TM 9-2320-280-20-3
10-82. REARVIEW MIRROR MAINTENANCE (Cont’d)
c. Disassembly
I
1. Remove two capscrews (10), lockwashers (9), washers (8), spacers (6), and mirror head (5) from
mirror brackets (7). Discard lockwashers (9).
2. Remove locknut (21), washer (22), nylon washers (23) and (2), capscrew (4) and upper mounting
bracket (1) from mirror arm assembly (3). Discard locknut (21).
3. Remove locknut (20), washer (19), and lower mounting bracket (18) from mirror lock (17). Discard
locknut (20).
4. Remove locknut (15), washer (16), and mirror lock (17) from arm assembly (3). Discard locknut (15).
NOTE
To remove clamps, slide clamps off mirror arm assembly.
5. Remove two locknuts (11), washers (12), capscrews (14), two clamps (13), and brackets (7) from mirror
arm assembly (3). Discard locknuts (11).
1.
2.
3.
4.
5.
NOTE
l To install clamps, slide clamps on mirror arm assembly,
l Ensure clamps are positioned on mirror arm assembly to align
with center of mirror head.
Install two clamps (13) and mirror brackets (7) on mirror arm assembly (3). Install mirror
brackets (7) between clamps (13) with two capscrews (14), washers (12), and locknuts (11).
Install mirror lock (17) on mirror arm assembly (3) with washer (16) and locknut (15).
Install lower mounting bracket (18) on mirror lock (17) with washer (19) and locknut (20).
Install upper mounting bracket (1) on mirror arm assembly (3) with capscrew (4), nylon washers (2)
and (23), washer (22), and locknut (21).
NOTE
Spacers must be positioned between mirror head and mirror
brackets for proper installation,
Install mirror head (5) and two spacers (6) on mirror brackets (7) with washers (8), lockwashers (9),
and capscrews (10).
10-134
