TM 9-2320-280-20-3
10-73. WINDSHIELD WIPER LINKAGE REPLACEMENT
This task covers:
a Removal
b. Installation
lNITIAL SETUP:
Tools
Equipment Condition
General mechanic’s tool kit:
l Windshield wiper switch/motor (12342501)
automotive (Appendix B, Item 1)
removed (para. 10-72).
Manual References
TM 9-2320-280-24P
l Windshield wiper motor (SF5578716) removed
(para. 10-71).
1. Remove two access covers (7) nom windshield frame (1).
2. Pull connector arm retainer (3) from ball stud (5) and remove motor drive lever (6) from connector
arms (4).
3. Disconnect connector arms (4) from wiper arm pivots (2) and remove connector arms (4) through
center access in windshield frame (1).
CAUTlON
Install the left (driver’s) side connector arm first or damage to
equipment will result.
1. Install connector arms (4) through center access on windshield frame (1) and connect connector
arms (4) to wiper arm pivots (2).
2. Connect connector arms (4) together with motor drive lever (6) and connector arm retainer (3) on
ball stud (5).
3. Install access covers (7) on windshield frame (1).
/
FOLLOW-ON TASK: l Install windshield wiper switch/motor (12342501) (para. 10-72).
l Install windshield wiper motor (SF5578716) (para. 10-71).
10-122
