NOTE
TM 9-2320-280-20-3
10-64. BODY HINGE MOUNT REPLACEMENT
This task covers:
a Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic’s tool kit:
M998, M998A1, M1035, M1035A1, M1035A2,
automotive (Appendix B, Item 1)
M1037, M1038, M1038A1, M1042 only:
l Soft top door removed (TM 9-2320-280-10).
Manual References
M966, M966A1, M996, M996A1, M1025, M1025A1,
TM 9-2320-280-10
M1025A2, M1026, M1026A1, M1043, M1043A1,
TM 9-2320-280-24P
M1043A2, M1044, M1044A1, M1045, M1045A1,
M1045A2, M1046 and M1046A1 only
l Ballistic crew door removed (para. 11-2).
Perform step 1 for upper front body hinge removal.
1. Remove two nuts (1), washers (2), twelve-point screws (5), washers (4), and upper front body hinge
mount (3) from body (6).
NOTE
Perform step 2 for lower front body hinge removal.
2. Remove two twelve-point screws (9), washers (8), and lower front body hinge mount (7) from body (6).
b. Installation
NOTE
Perform step 1 for lower and rear body hinge mount installation.
1. Install lower body hinge mount (7) on body (6) with two washers (8) and twelve-point screw (9).
Tighten twelve-point screws (9) to 8 lb-ft (11 Nom).
NOTE
Perform step 2 for upper front body hinge installation.
2. Install upper body hinge mount (3) on body (6) with two washers (4), twelve-point screws (5),
washers (2), and nuts (1). Tighten twelve-point screws (5) to 8 lb-ft (11 N-m).
FOLLOW-ON TASKS: M998, M998A1, M1035, M1035A1, M1035A2, M1037, M1038, M1038A1, M1042 only
l Install soft top door (TM 9-2320-280-10).
M966, M966A1, M996, M996A1, M1025, M1025A1, M1025A2, M1026, M1026A1,
M1043, M1043A1, M1043A2, M1044, M1044A1, M1045, M1045A1, M1045A2,
M1046 and M1046A1 only:
l Install ballistic crew door (para. 11-2).
l Adjust soft top door (para. 10-102).
10-103
