TM 9-2320-280-20-3
10-63. MUD FLAP INSTALLATION
I
This task covers:
Installation
INITIAL SETUP
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two mud flaps (Appendix D, Fig. D-88)
Eight locknuts (Appendix G, Item 103).
Manual References
TM 9-2320-280-24P
Installation
NOTE
Mud flap installation will prevent stones thrown by tires from
hitting other vehicles. Installation is at commander’s discretion.
Refer to appendix D, Fig. D-88.
1. Remove two capscrews (4) and washers (3) from shield (5) and body (1).
2. Install mud flap assembly (2) on shield (5) and body (1) with two washers (3) and capscrews (4).
3. Repeat steps 1 and 2 for opposite side.
10-102
