TM 9-2320-280-20-3
10-56. CARGO TIEDOWN REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
Materials/Parts
All except M996, M996A1, M997, M997A1,
Locknut (Appendix G, Item 70)
M997A2, M1037, M1042
Manual References
Tools
TM 9-2320-280-24P
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Personnel Required
One mechanic
One assistant
NOTE
. For removal of rear cargo tiedown, one assistant will be needed.
l Early production vehicles will have a capscrew in place of a hex
head screw.
1. Remove hex head screw (1) and front cargo tiedown (2) from cargo floor (3).
2. Remove locknut (7), washer (6), hex head screw (4), and rear cargo tiedown (5) from cargo floor (3).
Discard locknut (7).
NOTE
For installation of rear cargo tiedown, one assistant will be needed.
1. Install front cargo tiedown (2) on cargo floor (3) with hex head screw (1). Tighten capscrew ( 1) to
65 lb-ft (88 N-m).
2. Install rear cargo tiedown (5) on cargo floor (3) with hex head screw (4), washer (6), and locknut (7).
Tighten locknut (7) to 65 lb-ft (88 N.rn).
10-92
