TM 9-2320-280-20-3
10-53. CARGO BULKHEAD REPLACEMENT
This task covers:
a. Removal
b. Installation
lNITIAL SETUP:
Applicable Models
M998, M998A1, M1038, M1038A1, M1097,
M1097A1, M1097A2
Tools
General mechanic’s tool kit
automotive (Appendix B, Item 1)
Materials/Parts
Four lockwaahers (Appendix G, Item 123)
ManuaI References
TM 9-2320-280-24P
1. Remove two capscrews (7), lockwashers (8), washers (9), and cargo bulkhead bracket (10) from
cargo floor (11). Discard lockwashers (8).
2. Remove two nuts (1), lockwashers (2), washers (3), capscrews (5), and washers (3) from cargo
bulkhead (6) and “B“ pillar (4). Discard lockwashers (2).
3. Remove cargo bulkhead (6) from vehicle.
4. Inspect anti-noise pads (12) for damage. Replace if damaged.
1. Install cargo bulkhead (6) on cargo floor (11).
2. Install cargo bulkhead (6) on “B” pillar (4) with two washers (3), capscrews (5), washers (3),
lockwashers (2), and nuts (1).
3. Install cargo bulkhead bracket (10) on cargo floor (11) with two washers (9), lockwashers (8), and
capscrews (7). Tighten capscrews (7) to 65 lb-ft (88 N.m).
4.
Tighten nuts (1) to 15 lb-ft (20 N.m).
10-88
