TM 9-2320-280-20-3
10-55. CARGO BARRIER EXTENSION MAINTENANCE
1
This task covers:
a Removal
c. Assembly
b. Disassembly
d. Installation
INITIAL SETUP
Applicable Models
Materials/Parts
M998, M998A1, M1038, M1038A1, M1097,
Eight locknuts (Appendix G, Item 76)
M1097A1, M1097A2
Manual References
Tools
TM 9-2320-280-24P
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Remove quick release pin (12) from post assembly (4) and remove cargo barrier extension (5) from cargo
bulkhead (13).
1. Remove screw (6) and lanyard (7) from post assembly (4).
2. Remove twenty-four screws (1), nut and washer assemblies (3), and three backboards (2) from four
post assemblies (4).
3. Remove eight locknuts (11), washers (9), capscrews (8), washers (9), and four mounting brackets (10)
from cargo bulkhead (13). Discard locknuts (11).
c. Assembly
1. Install lanyard (7) on post assembly (4) with screw (6).
2. Install three backboards (2) on post four assemblies (4) with twenty-four screws (1) and nut and
washer assemblies (3).
3. Install four mounting brackets (10) on cargo bulkhead (13) with eight washers (9), capscrews (8),
washers (9), and locknuts (11).
NOTE
When installing cargo barrier extension, ensure side rack pins on
post assemblies slide into holes of cargo bulkhead.
Install cargo barrier extension (5) to cargo bulkhead (13) with quick release pin (12).
10-90
