TM 9-2320-280-20-2
9-12. TOWING PINTLE MAINTENANCE (Cont’d)
4. Install front plate (26) and back plate (31) on front bumper (25) with four washers (32), capscrews (34),
washers (32), and locknuts (33). Tighten locknuts (33) to 90 lb-ft (122 N·m).
5. Install towing pintle (27) with washer (29) and slotted nut (30).
6. Tighten slotted nut (30) until towing pintle (27) is tight. Back off nut (30) until towing pintle (27)
rotates freely and hole in towing pintle (27) shaft aligns with slot in nut (30). Install cotter pin (28).
OPTIONAL
FOLLOW-ON TASKS: Lubricate rear-mounted towing pintle (TM 9-2320-280-10).
9-19
