TOWING PINTLE MAINTENANCE - TM-9-2320-280-20-2

TOWING PINTLE REPLACEMENT (M1123)

TOWING PINTLE MAINTENANCE - TM-9-2320-280-20-2_901

TM-9-2320-280-20-2 Truck Utility Cargo/Troop 1-1/4 Ton 4x4 Manual
Page Navigation
886

TM 9-2320-280-20-2 9-12. TOWING PINTLE MAINTENANCE This task covers: a. Removal d. Assembly b. Disassembly e. Installation c. Cleaning INITIAL SETUP: Tools Manual References General mechanic’s tool kit: TM 9-2320-280-10 automotive (Appendix B, Item 1) TM 9-2320-280-24P Materials/Parts General Safety Instructions Two cotter pins (Appendix G, Item 22) Cleaning will be done in a well-ventilated area and Drive screw (Appendix G, Item 30) a fire extinguisher will be kept nearby when Two locknuts (Appendix G, Item 71) drycleaning solvent is used. Four locknuts (Appendix G, Item 93) Drycleaning solvent (Appendix C, Item 18) NOTE Contact DS maintenance for fabrication instructions of optional towing pintle. a. Removal NOTE Perform steps 1 and 2 for rear-mounted towing pintle. Perform steps 3 and 4 for optional towing pintle mounted to the front bumper. 1. Remove cotter pin (3), slotted nut (2), washer (4), and towing pintle (9) from rear crossmember (7). Discard cotter pin (3). 2. Remove four nuts (1), washers (11), capscrews (10), washer (11), two support plates (6), backing plate (5), and safety chain plate (8) from rear crossmember (7). 9-15

Privacy Statement
Press Release
Contact