TM 9-2320-280-20-2
9-7. RADIATOR FRONT MOUNT BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-10
automotive (Appendix B, Item 1)
TM 9-2320-280-24P
Materials/Parts
Equipment Condition
Three locknuts (Appendix G, Item 70)
Hood raised and secured (TM 9-2320-280-10)
1. Remove locknut (3), washer (2), capscrew (10), washer (2), and spacer (9) from radiator (4) and front
mount bracket (11). Discard locknut (3).
2. Remove two locknuts (7), washers (8), capscrews (1), washers (8), bracket (11), and mount (6) from
front suspension crossmember (5). Discard locknuts (7).
1. Install mount (6) and bracket (11) on front suspension crossmember (5) with two washers (8), capscrews (1),
washers (8), and locknuts (7). Tighten locknuts (7) to 90 lb-ft (122 N·m).
2. Install radiator (4) on bracket (11) with spacer (9), washer (2), capscrew (10), washer (2), and locknut (3).
Tighten locknut (3) to 30 lb-ft (41 N·m).
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10).
9-9
