TM 9-2320-280-20-2
8-28. POWER STEERING COOLER REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic’s tool kit:
Hood raised and secured (TM 9-2320-280-10).
automotive (Appendix B, Item 1)
General Safety Instructions
Materials/Parts
Do not drain fluid when engine is hot.
Two lockwashers (Appendix G, Item 109)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
CAUTION
Do not bend power steering oil cooler fins. Damaged fins reduce
cooling efficiency, which may damage power steering pump and/or
gear.
W A R N I NG
Do not drain fluid when engine is hot. Severe injury to personnel
will result.
CAUTION
Cover or plug all hoses and connections immediately after
disconnection to prevent contamination. Remove all plugs prior to
connection.
NOTE
Have drainage container ready to catch fluid.
1. Loosen two clamps (4) and disconnect hoses (2) and (3) from cooler (8).
2. Remove two screws (5), lockwashers (6), washers (7), and cooler (8) from oil cooler (1). Discard
lockwashers (6).
8-84
