TM 9-2320-280-20-2
8-27. POWER STEERING COOLER HOSE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts (Appendix G, Item 58)
Tiedown strap (Appendix G, Item 241)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Hood raised and secured (TM 9-2320-280-10)
General Safety Instructions
Do not drain fluid when engine is hot.
W A R N I NG
Do not drain fluid when engine is hot. Severe injury to personnel
will result.
CAUTION
1.
2.
3.
4.
5.
8-82
Cover or plug all hoses and connections immediately after
disconnection to prevent contamination. Remove all plugs prior to
connection.
NOTE
Have drainage container ready to catch fluid.
Loosen two clamps (14) and disconnect hoses (7) and (10) from cooler (13).
Remove tiedown strap (11) from oil cooler lines (12) and hoses (7) and (10). Discard tiedown
strap (11).
Loosen clamp (9) and remove hose (10) from steering gear (8).
Remove two locknuts (6), washers (5), and capscrews (1) from four clamps on hoses (7) and (15).
Discard locknuts (6).
Loosen clamp (2) and remove hose (7) from control valve elbow (3) and remove hose (7).
