TM 9-2320-280-20-2
8-25. POWER STEERING HYDRAULIC SYSTEM PRESURE AND RETURN HOSE
REPLACEMENT (Cont'd)
FOLLOW-ON TASKS: • Connect battery ground cable (para. 4-73).
• Bleed power steering system (para. 8-29).
Change 2
8-77
3.
Position two clamps (15) and clamp (5) on return hose (8) and install control valve hose (16) and two
clamps (15) with two capscrews (14), washers (13), and locknuts (12).
NOTE
Perform step 5 for vehicles with new alternator support bracket
configuration.
4.
Install clamp (10), spacer (4), and two clamps (5) to alternator bracket (1) with capscrew (2),
washer (7), and locknut (6).
5.
Install harness clamp (10) and two clamps (5) to power steering lines bracket (11) with capscrew (2),
two washers (7), and locknut (6). Install tiedown strap (11.1) on return hose (8).
