7-24. LEFT PARKING BRAKE CABLE/MOUNTING BRACKET REPLACEMENT (Cont’d)
TM 9-2320-280-20-2
7-60
Change 2
b. Installation
NOTE
Perform step 1 if replacing parking brake cable mounting bracket.
If not, proceed to step 2.
NOTE
Ensure clamp bracket (P/N 12342966) is installed on vehicle.
CAUTION
Ensure that the caliper cable bracket is secure with no signs of looseness
and the lever is in contact with the caliper cable bracket stop. Damage
to equipment and poor performance will result if not aligned properly.
1.
Install parking brake cable mounting bracket (4) and tailpipe hanger (6) on rear body mount (7)
with two capscrews (5), four washers (3), two lockwashers (2), and nuts (1).
2.
Install clamp bracket (34) on support bracket (14) with washer (31), capscrew (41), washer (33), and
locknut (32).
3.
Slide parking brake cable clamp (35) onto parking bracket cable assembly (22) and install cable clamp (35)
on clamp bracket (34) with lockwasher (36) and capscrew (37).
4.
Slide parking brake cable clamp (38) onto parking brake cable assembly (22) and install cable clamp (38)
on clamp bracket (34) with capscrew (40), washer (39), and locknut (42).
5.
Install parking brake cable clamp (12) on parking brake cable assembly (22) and install cable clamp (12)
on parking brake cable mounting bracket (4) with washer (11), capscrew (13), and nut and lockwasher
assembly (10).
6.
Install parking brake cable sleeve (9) on “C” beam (28) and parking brake cable (8) on equalizer bar (29)
with clip (30).
7.
Install parking brake cable sleeve (9) on rear caliper cable bracket (15) with cable clip (16).
8.
Install brake clevis (20) on rear caliper lever (17) with clevis pin (21), washer (19), and cotter pin (18).
9.
Install parking brake cable assembly (22) on bracket (26) with clamp (23), capscrew (25), and lockwasher (24).
10.
Install bracket (26) on bracket (14) with two capscrews (27).
