TM 9-2320-280-20-2
6-24. STABILIZER BAR LINK REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-24P
automotive (Appendix B, Item 1)
Materials/Parts
Locknut (Appendix G, Item 66)
Sealing compound (Appendix C, Item 46)
1. Remove locknut (1) and two washers (2) from bar link (3) and stabilizer bar (4). Discard locknut (1).
2. Remove capscrew (5), two washers (6), and bar link (3) from lower control arm (7).
1. Apply sealing compound to threads of capscrew (5). Install bar link (3) to lower control arm (7) with
two washers (6) and capscrew (5). Tighten capscrew (5) to 70 lb-ft (95 N m).
2. Install bar link (3) to stabilizer bar (4) with two washers (2) and locknut (1). Tighten locknut (1) to
75 lb-ft (102 N m).
6-56
