TM 9-2320-280-20-2
6-23. STABILIZER BAR REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-24P
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts (Appendix G, Item 66)
1. Remove two locknuts (10), nuts (7), and six washera (8) from bar links (11) and stabilizer bar (9).
Discard locknuts (10). Remove bar links (11) and pins (1) from stabilizer bar (9).
2. Remove four nuts (5), washers (6), two clamps (4), and stabilizer bar (9) from frame brackets (2).
3. Remove stabilizer bar bushings (3) from stabilizer bar (9).
1. Install stabilizer bar bushings (3) on stabilizer bar (9).
2. Install stabilizer bar (9) on frame brackets (2) with two clamps (4), four washers (6), and nuts (5).
Tighten nuts (5) to 60 lb-ft (81 N m).
3. Install pins (1) in bar links (11).
4. Install bar links (11) to stabilizer bar (9) with six washers (8), two nuts (7), and locknuts (10).
Tighten locknuts (10) to 75 lb-ft (102 N m).
6-55
