TM 9-2320-280-20-2
5-30
Change 2
5-12. TRANSMISSION SHIFT ROD MAINTENANCE (3L80)
This task covers:
a. Removal
c. Adjustment
b. Installation
a. Removal
b. Installation
c. Adjustment
1.
Place transmission shift lever arm (7) to “N’’ (neutral) position.
2.
Remove cotter pin (9) and washer (8) from shift rod trunnion (6) and shift lever arm (7). Discard cotter pin (9).
3.
Remove cotter pin (1) and washer (2) from shift rod trunnion (4) and transmission selector lever (3)
and disconnect shift rod (5). Discard cotter pin (1).
4.
Remove shift rod trunnion (6) from shift rod (5).
1.
Install shift rod trunnion (6) to shift rod (5).
2.
Connect shift rod trunnion (4) to transmission selector lever (3) with washer (2) and cotter pin (1).
3.
Adjust shift rod (para. c).
1.
Move shifter (10) into “1’’ position and ensure transmission selector lever (3) is in the forward position, “1’’.
2.
Turn shift rod trunnion (6) so that it slips easily into hole in the shift lever arm (7).
3.
Secure shift rod (5) and trunnion (6) to shift lever arm (7) with washer (8) and cotter pin (9).
INITIAL SETUP:
Applicable Models
All vehicles except: M997A2, M1025A2,
M1035A2, M1043A2, M1045A2, M1097A2,
M1123
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two cotter pins (Appendix G, Item 17)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
CAUTION
If the manual control linkage arm is not in the proper detent for each
transmission selector lever position, transmission will be damaged.
