TM 9-2320-280-20-2
4-102. INTERIOR LIGHTING HARNESS ASSEMBLY REPLACEMENT (M996, M996A1) (Contd)
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
Connect two harness leads (3) on light harness leads (4).
Install grommet (2) on cover (11).
Position cover (11) and connect six harness leads (1) to light leads (14).
Install cover (11) on body (6) with ten screws (8).
Install clamp (9) on light harness (7) and cover (13) with screw (10) and nut and lockwasher
assembly (5).
Install cover (13) on body (6) with four screws (12).
Install grommet (15) on harness (16).
Position grommet (19) and harness (16) in control box (25).
Install cover (17) on body (6) with four screws (18).
Connect lead 791B (29) to NBC harness lead 791A (27).
Install eight leads (20) on terminal block (26) and ground buss (28) with eight screws (21).
Install cover (22) on control box (25) with four screws (23) and lockwashers (24).
4-230