TM 9-2320-280-20-2
4-102. INTERIOR LIGHTING HARNESS ASSEMBLY REPLACEMENT (M996, M996A1) (Cont’d)
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
4-224
Remove seven screws (1) and clamps (3) from harness (2) and body (4).
Remove two screws (15) and clamps (14) from harness (2) and body (4).
Remove two grommets (13) from harness (2) and body (4).
Remove four screws (19) and lockwashers (18) from backup light cover (17) and body (16). Pull
cover (17) away from body (16) to allow access to harness (2). Discard lockwashers (18).
Disconnect harness lead 21H (21) from light harness 21G (20).
Remove grommet (12) from harness (2) and body (4).
Remove screw (5) and clamp (6) from harness (2) and body (4).
Remove nut and lockwasher assembly (11), screw (8), and clamp (7) from harness (2) and body (4)
Discard nut and lockwasher assembly (11).
Disconnect two harness leads (10) from blackout switch leads (9).
Remove six screws (23) and clamps (22) from harness (2) and body (24).
