TM 9-2320-280-20-2
4-101. INTERIOR LIGHTING HARNESS ASSEMBLY REPLACEMENT (M997, M997A1,
M997A2) (Cont’d)
16. Connect four harness leads (4) to light harness leads (6).
17. Install grommet (3) on cover (14) and connect six harness leads (1) and (5) to light leads (17)
and (11).
18. Install cover (14) on body (8) with ten screws (10).
19. Install clamp (12) on light harness (9) and cover (16) with screw (13) and nut and lockwasher
assembly (7).
20. Install cover (16) on body (8) with four screws (15).
21. Install clamp (19) on harness (2) and body (8) with screw (18).
22. Install two clamps (21) on harness (2) and duct (20) with two screws (22).
23. Connect lead 791B (32) to NBC harness lead 791A (30).
24. Install eight leads (23) on terminal block (29) and ground buss (31) with eight screws (24).
25. Install grommet (33) on control box (28).
26. Install cover (25) on control box (28) with four screws (26) and lockwashers (27).
4-220
