TM 9-2320-280-20-2
4-73. BATTERY CABLE MAINTENANCE (Cont’d)
d. Ground Cable Removal
NOTE
Perform step 1 for M997A2, M1025A22, M1035A2, M1043A2,
M1045A2, and M1097A2 vehicles only. Perform step 2 for all other
vehicles.
1. Remove nut (5), leads (6) and (7), screw (9), and ground cable (4) from terminal clamp (8).
2. Remove nut (5), screw (9), and ground cable (4) from terminal clamp.
3. Remove capscrew (3), lockwasher (2), and ground cable (4) from shunt (1).
e. Ground Cable Installation
1. Position ground cable (4) in approximate mounting location and install ground cable (4) to shunt (1)
with lockwasher (2) and capscrew (3).
NOTE
Perform step 2 for M997A2, M1025A2, M1035A2, M1043A2,
M1045A2, and M1097A2 vehicles only. Perform step 3 for all other
vehicles.
2. Install ground cable (4) on terminal clamp (8) with screw (9), leads (7) and (6), and nut (5).
3. Install ground cable (4) on terminal clamp (8) with screw (9) and nut (5).
NOTE
All vehicles except M997A2, M1025A2, M1035A2, M1043A2,
M1045A2, and M1097A2 vehicles have two caps and boots.
1. Remove cap (19) from battery terminal boot (20).
2. Clean lubricating oil from battery terminal boot (20).
4-118
