TM 9-2320-280-20-2
4-13. ELECTRICAL GAUGE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic’s tool kit:
TM 9-2320-280-10
automotive (Appendix B, Item 1)
TM 9-2320-280-24P
Materials/Parts
Equipment Condition
Two lockwashers (Appendix G, Item 111)
Battery ground cable disconnected (para. 4-73).
NOTE
All electrical gauges are removed and installed basically the
same. This procedure covers the temperature gauge.
Prior to removal, tag all leads for installation.
1. Remove four capscrews (8) from instrument cluster (1) and instrument panel (6).
2. Pull instrument cluster (1) away from panel (6).
3. Disconnect leads (4) and (5) from gauge (9).
4. Remove two nuts (3), lockwashers (7), gauge retaining bracket (2), and gauge (9) from instrument
cluster (1). Discard lockwashers (7).
1. Install gauge (9) and retaining bracket (2) on instrument cluster (1) with two lockwashers (7) and
nuts (3). Tighten nuts (3) to 8 lb-in. (1 N*m).
2. Connect leads (4) and (5) to gauge (9).
3. Install instrument cluster (1) to panel (6) with four capscrews (8).
4-28
