4-2.1. 60 AMPERE ALTERNATOR REGULATOR REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
INITIAL SETUP:
Tools
____
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
____________
O-ring (Appendix G, Item 164.1)
Manual References
________________
TM 9-2320-280-24P
Equipment Condition
__________________
60 ampere alternator removed (para. 4-2).
TM 9-2320-280-20-2
4-6.2
Change 2
NOTE
Regulator is part of end cover. Do not disassemble.
1.
Remove six screws (1), end cover (2), and O-ring (3) from end housing (4). Discard O-ring (3).
2.
Disconnect four leads (6) from terminals (7) on regulator (8).
b. Installation
1.
Install O-ring (3) on end cover (2).
2.
Connect four leads (6) to terminals (7) on regulator (8).
3.
Install end cover (2) on end housing (4) with six screws (1).
4.
Check alternator (5) for correct output voltage (para. 4-2, task c.).
