TM 9-2320-280-20-2
3-69. RADIATOR INLET HOSE REPLACEMENT
This task covers:
a. Removal
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1
Manual References
TM 9-2320-280-24P
b. Installation
Equipment Condition
Cooling system depressurized (para. 3-60).
a. Removal
1. Loosen two clamps (2) and remove hose (3) from radiator (1) and water crossover (4).
2. Remove two clamps (2) from hose (3).
1. Install two clamps (2) to hose (3).
N O TE
For vehicles equipped with a 200 amp alternator, it is recommended
that the inlet hose be installed with the hose twisted counterclockwise
and upward until a kink in the hose starts to form.
2. Install hose (3) on water crossover (4) and radiator (1) with two clamps (2).
FOLLOW-ON TASK: Tighten coolant filler cap (para. 3-60).
3-124
