TM 9-2320-280-20-2
3-67. THERMOSTAT BYPASS HOSE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic’s tool kit:
Cooling system drained as required (para. 3-60).
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-280-24P
a. Removal
1. Loosen two clamps (2) and remove hose (3) from water pump (4) and water crossover (1).
2. Remove two clamps (2) from hose (3).
b. Installation
1. Install two clamps (2) on hose (3).
2. Install hose (3) on water pump (4) and water crossover (1) with two clamps (2).
FOLLOW-ON TASK: Fill cooling system (para. 3-60).
3-121
